سانچو:Infobox body of water/doc

{{{name}}}
{{{native_name}}}
{{{name}}}; {{{native_name}}}
	{{{other_name}}}
	[[File:{{{image}}}\|frameless\|alt={{{alt}}}\|border\|upright=1.14]]; {{{caption}}}
مقام	{{{location}}}
گروھ	{{{group}}}
پاڻي جو قسم	{{{type}}}
اشتقاق	{{{etymology}}}
حصو آهي	{{{part_of}}}
اھم داخلي وھڪرا	{{{inflow}}}
درياءَ جو ڇوڙ	{{{rivers}}}
اھم خارجي وھڪرا	{{{outflow}}}
سامونڊي وسيلا	{{{oceans}}}
ڪيچمينٽ	{{{catchment}}}
سامونڊي طاس	{{{basin_countries}}}
مينيجنگ ايجنسي	{{{agency}}}
عھدو	{{{designation}}}
تعميراتي تاريخ	{{{date-built}}}
تعميراتي انجنيئر	{{{engineer}}}
پھرين دفعو ٻڏو	{{{date-flooded}}}
وڌ کان وڌ ڊيگھ	{{{length}}}
وڌ کان وڌ ويڪر	{{{width}}}
سطحي پکيڙ	{{{area}}}
سراسري اونھائي	{{{depth}}}
وڌ کان وڌ اونھائي	{{{max-depth}}}
پاڻي جو حجم	{{{volume}}}
رھائش وقت	{{{residence_time}}}
لوڻياٺ	{{{salinity}}}
ڪناري جي ڊيگھ 1	{{{shore}}}
سطح جي بلندي	{{{elevation}}}
وڌ کان وڌ گرمي	{{{temperature_high}}}
گھٽ ۾ گھٽ گرمي	{{{temperature_low}}}
ڄميل حصو	{{{frozen}}}
ٻيٽ	{{{islands}}}
طاس/حوض	{{{sections}}}
کاھيون	{{{trenches}}}
پاڻي جون بينچون	{{{benches}}}
آباديون	{{{cities}}}
ويب سائيٽ	{{{website}}}
حوالا	{{{reference}}}
	1 Shore length is not a well-defined measure.

This template can be used to add comparative, at-a-glance material to articles on lakes, oceans, bays, and similar water bodies. If there is a single article for the reservoir and the dam, then please use the integrated {{infobox dam}} template, instead of this template.

Usage

{{Infobox body of water
| name               = {{subst:PAGENAMEBASE}}
| native_name        = 
| native_name_lang   = 
| other_name         = 
<!--    Images     -->
| image              = 
| alt                = 
| caption            = 
| image_bathymetry   = 
| alt_bathymetry     = 
| caption_bathymetry = 
<!--    Stats      -->
| location           = 
| group              = 
| coordinates        = <!-- {{coord|DD|MM|SS|N|DD|MM|SS|W|region:ZZ_type:waterbody|display =inline,title}} -->
| type               = 
| etymology          = 
| part_of            = 
| inflow             = 
| rivers             = 
| outflow            = 
| oceans             = 
| catchment          = <!-- {{convert|VALUE|UNITS}} must be used -->
| basin_countries    = 
| agency             = 
| designation        = 
| date-built         = <!-- {{Start date|YYYY|MM|DD}} For man-made and other recent bodies of water -->
| engineer           = 
| date-flooded       = <!-- {{Start date|YYYY|MM|DD}} For man-made and other recent bodies of water -->
| length             = <!-- {{convert|VALUE|UNITS}} must be used --> 
| width              = <!-- {{convert|VALUE|UNITS}} must be used -->
| area               = <!-- {{convert|VALUE|UNITS}} must be used -->
| depth              = <!-- {{convert|VALUE|UNITS}} must be used -->
| max-depth          = <!-- {{convert|VALUE|UNITS}} must be used -->
| volume             = <!-- {{convert|VALUE|UNITS}} must be used -->
| residence_time     = 
| salinity           = 
| shore              = <!-- {{convert|VALUE|UNITS}} must be used -->
| elevation          = <!-- {{convert|VALUE|UNITS}} must be used -->
| temperature_high   = <!-- {{convert|VALUE|UNITS}} must be used -->
| temperature_low    = <!-- {{convert|VALUE|UNITS}} must be used -->
| frozen             = 
| islands            = 
| islands_category   = 
| sections           = 
| trenches           = 
| benches            = 
| cities             = 
<!--      Map      -->
| pushpin_map             = 
| pushpin_label_position  = 
| pushpin_map_alt         = 
| pushpin_map_caption     = 
<!--   Below       -->  
| website            = 
| reference          = 
}}

Parameters

name: name of the body of water. Avoid using templates, boldface or italics in this field.
native_name: name in local language. If more than one, separate using {{Plain list}}
native_name_lang: ISO 639-2 code e.g. "fr" for French. If more than one, use {{lang}} instead
other_name: Local, alternative or former names. Separate multiple values by using {{plainlist}} or {{unbulleted list}}.
image: characteristic_image.png Please avoid sunset pictures or maps (For maps, use image_bathymetry).
If missing, the article is added to Category:Wikipedia infobox body of water articles without image
see also: Wikipedia:WikiProject Lakes/Galleries
alt: Alt text describing the image, for visually impaired readers and other applications where the image cannot be seen
caption: Text about the image; avoid repeating the name of the body of water, it's already in the first field of the infobox.
image_bathymetry: bathymetry_image.png (or other image, avoid maps showing only the location of the body of water)
alt_bathymetry: Alt text for the bathymetry (or other) image
caption_bathymetry: Text about the bathymetry (or other) image
location: Text about the body of water's location. Note the town/state/region in which the body water is located. Names are listed in wikified form, without flags.
Add the country only if the body of water is located in several countries or if there are several basin countries, but only one country in which the body of water is located.
coordinates: Latitude and Longitude coordinates of the body of water. It is common to use the approximate center of the body of water, or simply any notable portion of the body of water, for the coordinates. Coordinates are generally displayed in the infobox and on the top corner of the articles. For more, see WP:GEO and WP:Obtaining geographic coordinates
Sample coordinates: {{coord|47|01|10|N|8|24|04|E}}
If missing, the article is placed in Category:Wikipedia infobox body of water articles without coordinates
type: type of lake. If it's a reservoir, add "[[reservoir]]".
For typologies, see Wikipedia talk:WikiProject Lakes#Lake types and Lake#Types of lakes
Samples values with wikimarkup (only one or a few may apply): [[periglacial]], [[subglacial lake]], [[artificial lake]] [[reservoir (water)|reservoir]], [[endorheic]], [[meromictic]], [[oxbow lake]], [[rift lake]], [[underground lake]], [[crater lake]], [[intermittent lake]], [[:Category:Former lakes|former lake]], [[:Category:Shrunken lakes|shrunken lake]]; [[oligotrophic]], [[mesotropic]], [[eutrophic lake]], [[hypertrophic]]
part_of: name of any parent basin or hydrology system
etymology: person, event or other entity the body is named after
inflow: major inflow sources — rivers, aquifers, glacial runoff, etc.
Use italics for any terms that are not place names, e.g. none
outflow: outflow waterway names.
If evaporation or seepage are notable outflows, they may be included.
Use italics for any terms that are not place names, e.g. evaporation
catchment: the area of catchment (in square kilometres) which includes the entire area of the drainage basin for that body of water. This may include rivers and other bodies of water. If this can be accompanied with a map or drawing, include it with the article.
Sample value: {{convert|2124|km2|sqmi|abbr=on}}
basin_countries: which countries have drainage to/from or border the body of water. To conform a standard, this should include all countries that are directly involved with the body of water's ecology; this would include inflows, outflows, or physically contact the body of water.
Countries are listed in unwikified form, without flags. For Antarctica, use "(Antarctica)".
agency: managing or owning organisation
designation

protected status as a nature reserve, etc.

date-built: date construction the body of water/reservoir started, if man-made.
date-flooded: date the body of water/reservoir was first flooded, if man-made or otherwise recent.
length: maximum length of the body of water in km, statute mile, and/or nautical miles; the length of the body of water at its longest dimension.
Sample value: {{convert|100|km|mi|abbr=on}}
width: maximum width of the body of water in km, statute mile, and/or nautical miles; perpendicular to the angle used to calculate length.
Sample value: {{convert|50|km|mi|abbr=on}}
min_width: minimum width of the strait in km, statute mile, and/or nautical miles; perpendicular to the angle used to calculate length. Note: do not use this parameter for lakes, bays, or other bodies of water.
area: total area of the body of water's surface in square kilometres, square miles, acres, or hectares; if this value varies drastically (due to evaporation or changes in flow), attempt to find a documented average value.
Sample conversion for imperial units: {{convert|1234|acre|abbr=on}} this renders as: 1٬234 acre (499 ha)
depth: Average depth of the body of water in metres, fathoms, and/or feet
Sample conversion for imperial units: {{convert|123|ft|abbr=on}} this renders as: 123 ft (37 m)
max-depth: Maximum depth of the body of water in metres, fathoms, and/or feet.
Sample value: 10 m (33 ft)
volume: total volume of the body of water (cubic metres, cubic kilometres, cubic miles [cu mi], and/or acre-feet)
Sample value: 11.8 km³
To convert acre-feet, use {{convert|1234567|acre.ft|abbr=on}} this renders as 1٬234٬567 acre·ft (1.522816×10⁹ m³)
residence_time: residence time of the body of water or lake retention time (generally in years). This is the mean time water spends in the body of water.
shore: length of the shoreline in kilometres and statute miles; this should not include values for waterways directly connected to the body of water, and should reflect the shore at average surface area.
Sample value: {{convert|75|km|mi|abbr=on}}
elevation: elevation above sea-level in meters; again, if this value varies due to variable inflow or outflow, attempt to use a documented average value. If at all possible, state the date at which the elevation was measured.
Sample value: {{convert|150|m|ft|abbr=on}}
islands: total number of islands in the body of water; it is common practice to also include the names of any notable islands in the body of water.
islands_category: if there is a specific category for articles about islands in the body of water, it can be added in this field (e.g., Islands of the Caspian Sea, Category:Lake islands or Category:Islands by ocean or sea). "Islands" in the infobox then links to one of these categories instead of Category:Islands by body of water.
sections
trenches
benches
cities: notable cities or settlements on or near the shore of the body of water.
frozen: Information about freezing: e.g. usual freezing date, months the body of water is frozen, last years the body of water was frozen, never, etc.
reference: references for some or all of the values. Rather than including full references in any of the previous fields, <ref name ="multiple"> and </ref> should be used in this field and cross-referenced in the other fields with <ref name ="multiple"/>. See Help:Footnotes

on how to use the tags.

align: "align =left" allows to align the infobox left (default is right). This avoids collision with another infobox.
pushpin_map: The name of a location map as per Template:Location map. Requires coordinates in |coordinates={{coord|...}} format.
pushpin_label_position: Location of the label to the pushpin. One of "left", "right", "top", or "bottom".
pushpin_map_alt: Pushpin map alt text.
pushpin_map_caption: Pushpin map caption.

Imperial units should be converted to metric units, preferably using {{convert}}, e.g. {{convert|1234|acre|abbr=on}} this renders as 1٬234 acre (499 ha)

Tracking categories

There are several tracking categories for maintenance of articles using this infobox:

زمرو:Wikipedia infobox body of water articles without image (0) – if image is missing
زمرو:Wikipedia infobox body of water articles without coordinates (0) – if coordinates is missing
زمرو:Wikipedia infobox body of water articles using duplicate parameters (0) – if specific duplicate fields are used
زمرو:Wikipedia infobox body of water articles needing maintenance (0) – if specific fields are missing, or included, see category description
زمرو:Pages using infobox body of water with unknown parameters (3)
زمرو:Pages using infobox body of water without convert template (0) - if {{convert}} is not used for measurement fields

The categories are hidden, i.e. they are not visible in the standard display of the articles (see WP:Hidden categories).

TemplateData

This is the TemplateData documentation for this template used by VisualEditor and other tools.

TemplateData for Infobox body of water

No description.

Template parameters
This template prefers block formatting of parameters.
Parameter		Description	Type	Status
Name	`name`	Name of the Body of Water.	String	required
Other Name	`other_name`	Local, Alternative or Former Names	String	optional
Image	`image`	Image of the Body of Water	صفحي جو نالو	optional
Image alternative text	`alt`	Alt text to display if the image specified by image does not display for whatever reason	String	optional
Image caption	`caption`	Caption for the image.	String	optional
Image Bathymetry	`image_bathymetry`	Bathymetry Image	صفحي جو نالو	optional
Alt Bathymetry	`alt_bathymetry`	Alternate text to display if image_bathymetry does not display for whatever reason	String	optional
Caption Bathymetry	`caption_bathymetry`	Image caption for image_bathymetry	String	optional
Location	`location`	Location of the Body of Water	String	optional
Coordinates	`coordinates` `coords`	Latitude and Longitude coordinates of the body of water	Number	optional
Type	`type`	Type of the Body of Water	String	optional
Etymology	`etymology`	person, event, or other entity body is named after	String	optional
Part of	`part_of`	Name of any parent basin or hydrology system	String	optional
Inflow	`inflow`	Major inflow sources — rivers, aquifers, glacial runoff, etc.	String	optional
Outflow	`outflow`	Outflow Waterway Names e.g. evaporation	String	optional
Catchment	`catchment`	The area of catchment (in square kilometres) which includes the entire area of the drainage basin for that body of water.	String	optional
Basin Countries	`basin_countries`	Which countries have drainage to/from or border the body of water.	String	optional
Date Built	`date-built`	Date of construction of the body of water/reservoir started, if man-made.	سِٽَ	optional
Date Flooded	`date-flooded`	Date of the body of water/reservoir was first flooded, if man-made or otherwise recent.	سِٽَ	optional
Agency	`agency`	Managing or owning organisation	String	optional
Length	`length`	Maximum length of the body of water in km	Number	optional
Width	`width`	Maximum width of the body of water in km	Number	optional
Area	`area`	Total area of the body of water's surface in square kilometres	Number	optional
Depth	`depth`	Average depth of the body of water in metres, fathoms, and/or feet	Number	optional
Max Depth	`max-depth`	Maximum depth of the body of water in metres, fathoms, and/or feet.	Number	optional
Volume	`volume`	Total volume of the body of water (cubic metres, cubic kilometres, cubic miles [cu mi], and/or acre-feet)	Number	optional
Residence Time	`residence_time`	Time spent by water in the body of water.	Number	optional
Shore	`shore`	Length of the shoreline in kilometres and statute miles this should not include values for waterways directly connected to the body of water, and should reflect the shore at average surface area.	Number	optional
Elevation	`elevation`	Elevation above sea-level in meters.	Number	optional
Frozen	`frozen`	Information about freezing: e.g. usual freezing date, months the body of water is frozen, last years the body of water was frozen, never, etc.	String	optional
Islands	`islands`	Total number of islands in the body of water	Number	optional
Cities	`cities`	Notable cities or settlements on or near the shore of the body of water.	Number	optional
Reference	`reference`	references for some or all of the values.	String	optional

Microformat

The HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

Sub-templates

If the place or venue has an "established", "founded", "opened" or similar date, use {{start date}} unless the date is before 1583 CE.

If it has a URL, use {{URL}}.

Please do not remove instances of these sub-templates.

Classes

hCard uses HTML classes including:

adr
agent
category
county-name
extended-address
fn
label
locality
nickname
note
org
region
street-address
uid
url
vcard

Geo is produced by calling {{coord}}, and uses HTML classes:

geo
latitude
longitude

Please do not rename or remove these classes nor collapse nested elements which use them.

Precision

When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter.