ماڊيول:TableTools

هي ماڊيول Lua جدولن (tables) سان ڪم ڪرڻ لاءِ ڪيترائي فنڪشن مهيا ڪري ٿو۔ اهو هڪ ميٽا-ماڊيول آهي، جيڪو ٻين Lua ماڊيولن مان سڏڻ لاءِ ٺاهيو ويو آهي، ۽ ان کي سڌو سنئون #invoke ذريعي سڏڻ نه گهرجي۔

ماڊيول لوڊ ڪرڻ

ڪنهن به فنڪشن کي استعمال ڪرڻ لاءِ، سڀ کان پهريان ماڊيول کي لوڊ ڪرڻ ضروري آهي۔

local TableTools = require('Module:TableTools')

isعدد صحيح

TableTools.isPositiveInteger(value)

جيڪڏهن value مثبت عدد صحيح (positive integer) هجي ته true موٽائيندو، ٻي صورت ۾ false۔ جيتوڻيڪ هي فنڪشن سڌو جدولن تي ڪم نٿو ڪري، پر اهو معلوم ڪرڻ لاءِ مفيد آهي ته ڪنهن جدول جي ڪنجي اري array حصي ۾ آهي يا ھيش hash حصي ۾۔

isنئن

TableTools.isNan(value)

جيڪڏهن value NaN هجي ته true موٽائيندو، ٻي صورت ۾ false۔ هي پڻ جدولن تي سڌو ڪم نٿو ڪري، پر اهو ڄاڻڻ لاءِ مفيد آهي ته ڪا قدر جدول جي ڪنجي طور صحيح آهي يا نه (Lua ۾ NaN کي ڪنجي طور استعمال ڪرڻ سان غلطي ايندي آهي)۔

تراکڙو نقل

TableTools.shallowClone(t)

هي فنڪشن ڪنهن جدول جي نقل (clone) ٺاهي ٿو۔ موٽايل قدر هڪ نئون جدول هوندو، پر سڀ ذيلي جدول (subtables) ۽ فنڪشن ساڳيا ئي شيئر ٿيندا۔ ميٽا طريقا جو احترام ڪيو ويندو، پر نئين جدول وٽ پنهنجو metatable نه هوندو۔

جيڪڏهن توهان اهڙو جدول ٺاهڻ چاهيو جنهن ۾ ڪو به ذيلي جدول شيئر نه هجي ۽ ميٽا جدول به منتقل ٿئي، ته استعمال ڪريو:

mw.clone

۽ جيڪڏهن ميٽا جدول منتقل نه ڪرڻي هجي ته deepCopy استعمال ڪريو۔

نقل ھٽايو

TableTools.removeDuplicates(t)

هي فنڪشن هڪ array مان نقل قدرن (duplicate values) کي هٽائي ٿو۔ هي صرف معياري arrays لاءِ ٺهيل آهي: مثبت عدد ڪنجيون استعمال ٿينديون ۽ پهرين nil کان پوءِ سڀ قدر نظرانداز ڪيا ويندا۔

مثال طور:

{5, 4, 4, 3, 4, 2, 2, 1}

هي فنڪشن واپس ڏيندو:

{5, 4, 3, 2, 1}

عددي ڪنجيون

TableTools.numKeys(t)

هي فنڪشن جدول t مان سڀ مثبت عدد ڪنجيون ڳولي هڪ ترتيب ڏنل array طور واپس ڪندو۔

مثال:

{'foo', nil, 'bar', 'baz', a='b'}

واپس ڏيندو:

{1,3,4}

عددي بيھڪ

TableTools.affixNums(t, prefix, suffix)

هي جدول مان انهن ڪنجيَن جا نمبر ڪڍي ٿو جن وٽ مخصوص مھڙ prefix يا پڇڙ suffix هجي۔

مثال:

{a1='foo', a3='bar', a6='baz'}

prefix 'a' سان نتيجو ٿيندو:

{1,3,6}

عددي ڊيٽا

TableTools.numData(t, compress)

اهڙي جدول کي منظم ڪري ٿو جنهن جون ڪنجيون "foo1"، "bar1"، "foo2" جهڙيون هجن۔

مثال نتيجو:

{ [1] = {foo='text', bar='text'}, [2] = {foo='text', baz='text'} }

جيڪڏهن ڪنجي integer سان ختم نه ٿئي ته ان کي "other" نالي سب ٽيبل ۾ رکيو ويندو۔

ڪمپريس اسپارس ايري

TableTools.compressSparseArray(t)

هي array مان nil قدر هٽائي ترتيب برقرار رکندو ته جيئن ipairs سان محفوظ نموني بيان ڪري سگهجي۔

مثال:

{1, nil, foo='bar', 3, 2}

نتيجو:

{1,3,2}

اسپارس iجوڙا

TableTools.sparseIpairs(t)

هي sparse arrays لاءِ iterator آهي۔ اهو ipairs جهڙو آهي، پر اهو پهرين nil تي نه رڪجي ٿو۔

استعمال:

for i, v in TableTools.sparseIpairs(t) do
   -- code block
end

ماپ

TableTools.size(t)

ڪنجي/قدر جدول (associative array) جي سائيز معلوم ڪري ٿو۔

مثال:

{foo='foo', bar='bar'}

نتيجو:

2

ڪنجين لاء فھرست

TableTools.keysToList(t, keySort, checked)

هي جدول جون سڀ ڪنجيون هڪ فهرست طور موٽائيندو ۽ انهن کي ترتيب ڏئي سگهجي ٿو۔

ترتيبي جوڙا

TableTools.sortedPairs(t, keySort)

هي جدول کي ٻيھر بيان ڪندو جڏهن ڪنجيون ترتيب ڏنل هجن۔

isايري

TableTools.isArray(value)

جيڪڏهن value هڪ جدول هجي جنهن جون ڪنجيون 1 کان شروع ٿيندڙ لڳاتار عدد هجن ته true موٽائيندو۔

isايري جھڙا

TableTools.isArrayLike(value)

جيڪڏهن قدر iterable هجي ۽ سڀ ڪنجيون لڳاتار integer هجن ته true موٽائيندو۔

موٽائڻ

TableTools.invert(arr)

ايري array ۾ ڪنجيون ۽ قدر الٽائي ڇڏيندو۔

مثال:

invert{ "a","b","c" }

نتيجو:

{a=1,b=2,c=3}

سيٽ لاء فھرست

TableTools.listToSet(arr)

array کي set ۾ تبديل ڪري ٿو۔

مثال:

listToSet{ "a","b","c" }

نتيجو:

{a=true,b=true,c=true}

اونھو نقل

TableTools.deepCopy(orig, noMetatable, alreadySeen)

هي جدول جي مڪمل نقل ٺاهي ٿو۔ اهو mw.clone جهڙو آهي، پر mw.loadData سان لوڊ ڪيل جدولن کي به نقل ڪري سگهي ٿو۔

اسپارس رابطو

TableTools.sparseConcat(t, sep, i, j)

مثبت integer ڪنجي وارن قدرن کي ترتيب سان گڏ ڪري ٿو۔

مثال:

sparseConcat{ "a", nil, "c", "d"}

نتيجو:

"acd"

ڊيگھ

TableTools.length(t, prefix)

array يا quasi-array جي ڊيگهه ڳولهي ٿو۔ هي exponential search الگورٿم استعمال ڪري ٿو۔

ايري ۾

TableTools.inArray(array, searchElement)
TableTools.inArray(array, searchElement, fromIndex)

جيڪڏهن searchElement array ۾ موجود هجي ته true موٽائيندو۔

هي جاوا اسڪرپٽ جي:

Array.prototype.includes()

فنڪشن جهڙو آهي۔

ضم ڪرڻ

TableTools.merge(...)

ڪيترن arrays کي گڏ ڪري هڪ نئون array ٺاهيندو۔

وڌائڻ

TableTools.extend(arr1, arr2)

پهريون array وڌائي ٻئي array جا سڀ عنصر ان ۾ شامل ڪندو۔

پڻ ڏسو

• {{#invoke:params}}

---

------------------------------------------------------------------------------------
--                                   TableTools                                   --
--                                                                                --
-- This module includes a number of functions for dealing with Lua tables.        --
-- It is a meta-module, meant to be called from other Lua modules, and should not --
-- be called directly from #invoke.                                               --
------------------------------------------------------------------------------------

local libraryUtil = require('libraryUtil')

local p = {}

-- Define often-used variables and functions.
local floor = math.floor
local infinity = math.huge
local checkType = libraryUtil.checkType
local checkTypeMulti = libraryUtil.checkTypeMulti

------------------------------------------------------------------------------------
-- isPositiveInteger
--
-- This function returns true if the given value is a positive integer, and false
-- if not. Although it doesn't operate on tables, it is included here as it is
-- useful for determining whether a given table key is in the array part or the
-- hash part of a table.
------------------------------------------------------------------------------------
function p.isPositiveInteger(v)
	return type(v) == 'number' and v >= 1 and floor(v) == v and v < infinity
end

------------------------------------------------------------------------------------
-- isNan
--
-- This function returns true if the given number is a NaN value, and false if
-- not. Although it doesn't operate on tables, it is included here as it is useful
-- for determining whether a value can be a valid table key. Lua will generate an
-- error if a NaN is used as a table key.
------------------------------------------------------------------------------------
function p.isNan(v)
	return type(v) == 'number' and v ~= v
end

------------------------------------------------------------------------------------
-- shallowClone
--
-- This returns a clone of a table. The value returned is a new table, but all
-- subtables and functions are shared. Metamethods are respected, but the returned
-- table will have no metatable of its own.
------------------------------------------------------------------------------------
function p.shallowClone(t)
	checkType('shallowClone', 1, t, 'table')
	local ret = {}
	for k, v in pairs(t) do
		ret[k] = v
	end
	return ret
end

------------------------------------------------------------------------------------
-- removeDuplicates
--
-- This removes duplicate values from an array. Non-positive-integer keys are
-- ignored. The earliest value is kept, and all subsequent duplicate values are
-- removed, but otherwise the array order is unchanged.
------------------------------------------------------------------------------------
function p.removeDuplicates(arr)
	checkType('removeDuplicates', 1, arr, 'table')
	local isNan = p.isNan
	local ret, exists = {}, {}
	for _, v in ipairs(arr) do
		if isNan(v) then
			-- NaNs can't be table keys, and they are also unique, so we don't need to check existence.
			ret[#ret + 1] = v
		elseif not exists[v] then
			ret[#ret + 1] = v
			exists[v] = true
		end
	end
	return ret
end

------------------------------------------------------------------------------------
-- numKeys
--
-- This takes a table and returns an array containing the numbers of any numerical
-- keys that have non-nil values, sorted in numerical order.
------------------------------------------------------------------------------------
function p.numKeys(t)
	checkType('numKeys', 1, t, 'table')
	local isPositiveInteger = p.isPositiveInteger
	local nums = {}
	for k in pairs(t) do
		if isPositiveInteger(k) then
			nums[#nums + 1] = k
		end
	end
	table.sort(nums)
	return nums
end

------------------------------------------------------------------------------------
-- affixNums
--
-- This takes a table and returns an array containing the numbers of keys with the
-- specified prefix and suffix. For example, for the table
-- {a1 = 'foo', a3 = 'bar', a6 = 'baz'} and the prefix "a", affixNums will return
-- {1, 3, 6}.
------------------------------------------------------------------------------------
function p.affixNums(t, prefix, suffix)
	checkType('affixNums', 1, t, 'table')
	checkType('affixNums', 2, prefix, 'string', true)
	checkType('affixNums', 3, suffix, 'string', true)

	local function cleanPattern(s)
		-- Cleans a pattern so that the magic characters ()%.[]*+-?^$ are interpreted literally.
		return s:gsub('([%(%)%%%.%[%]%*%+%-%?%^%$])', '%%%1')
	end

	prefix = prefix or ''
	suffix = suffix or ''
	prefix = cleanPattern(prefix)
	suffix = cleanPattern(suffix)
	local pattern = '^' .. prefix .. '([1-9]%d*)' .. suffix .. '$'

	local nums = {}
	for k in pairs(t) do
		if type(k) == 'string' then
			local num = mw.ustring.match(k, pattern)
			if num then
				nums[#nums + 1] = tonumber(num)
			end
		end
	end
	table.sort(nums)
	return nums
end

------------------------------------------------------------------------------------
-- numData
--
-- Given a table with keys like {"foo1", "bar1", "foo2", "baz2"}, returns a table
-- of subtables in the format
-- {[1] = {foo = 'text', bar = 'text'}, [2] = {foo = 'text', baz = 'text'}}.
-- Keys that don't end with an integer are stored in a subtable named "other". The
-- compress option compresses the table so that it can be iterated over with
-- ipairs.
------------------------------------------------------------------------------------
function p.numData(t, compress)
	checkType('numData', 1, t, 'table')
	checkType('numData', 2, compress, 'boolean', true)
	local ret = {}
	for k, v in pairs(t) do
		local prefix, num = mw.ustring.match(tostring(k), '^([^0-9]*)([1-9][0-9]*)$')
		if num then
			num = tonumber(num)
			local subtable = ret[num] or {}
			if prefix == '' then
				-- Positional parameters match the blank string; put them at the start of the subtable instead.
				prefix = 1
			end
			subtable[prefix] = v
			ret[num] = subtable
		else
			local subtable = ret.other or {}
			subtable[k] = v
			ret.other = subtable
		end
	end
	if compress then
		local other = ret.other
		ret = p.compressSparseArray(ret)
		ret.other = other
	end
	return ret
end

------------------------------------------------------------------------------------
-- compressSparseArray
--
-- This takes an array with one or more nil values, and removes the nil values
-- while preserving the order, so that the array can be safely traversed with
-- ipairs.
------------------------------------------------------------------------------------
function p.compressSparseArray(t)
	checkType('compressSparseArray', 1, t, 'table')
	local ret = {}
	local nums = p.numKeys(t)
	for _, num in ipairs(nums) do
		ret[#ret + 1] = t[num]
	end
	return ret
end

------------------------------------------------------------------------------------
-- sparseIpairs
--
-- This is an iterator for sparse arrays. It can be used like ipairs, but can
-- handle nil values.
------------------------------------------------------------------------------------
function p.sparseIpairs(t)
	checkType('sparseIpairs', 1, t, 'table')
	local nums = p.numKeys(t)
	local i = 0
	local lim = #nums
	return function ()
		i = i + 1
		if i <= lim then
			local key = nums[i]
			return key, t[key]
		else
			return nil, nil
		end
	end
end

------------------------------------------------------------------------------------
-- size
--
-- This returns the size of a key/value pair table. It will also work on arrays,
-- but for arrays it is more efficient to use the # operator.
------------------------------------------------------------------------------------
function p.size(t)
	checkType('size', 1, t, 'table')
	local i = 0
	for _ in pairs(t) do
		i = i + 1
	end
	return i
end

local function defaultKeySort(item1, item2)
	-- "number" < "string", so numbers will be sorted before strings.
	local type1, type2 = type(item1), type(item2)
	if type1 ~= type2 then
		return type1 < type2
	elseif type1 == 'table' or type1 == 'boolean' or type1 == 'function' then
		return tostring(item1) < tostring(item2)
	else
		return item1 < item2
	end
end
------------------------------------------------------------------------------------
-- keysToList
--
-- Returns an array of the keys in a table, sorted using either a default
-- comparison function or a custom keySort function.
------------------------------------------------------------------------------------
function p.keysToList(t, keySort, checked)
	if not checked then
		checkType('keysToList', 1, t, 'table')
		checkTypeMulti('keysToList', 2, keySort, {'function', 'boolean', 'nil'})
	end

	local arr = {}
	local index = 1
	for k in pairs(t) do
		arr[index] = k
		index = index + 1
	end

	if keySort ~= false then
		keySort = type(keySort) == 'function' and keySort or defaultKeySort
		table.sort(arr, keySort)
	end

	return arr
end

------------------------------------------------------------------------------------
-- sortedPairs
--
-- Iterates through a table, with the keys sorted using the keysToList function.
-- If there are only numerical keys, sparseIpairs is probably more efficient.
------------------------------------------------------------------------------------
function p.sortedPairs(t, keySort)
	checkType('sortedPairs', 1, t, 'table')
	checkType('sortedPairs', 2, keySort, 'function', true)

	local arr = p.keysToList(t, keySort, true)

	local i = 0
	return function ()
		i = i + 1
		local key = arr[i]
		if key ~= nil then
			return key, t[key]
		else
			return nil, nil
		end
	end
end

------------------------------------------------------------------------------------
-- isArray
--
-- Returns true if the given value is a table and all keys are consecutive
-- integers starting at 1.
------------------------------------------------------------------------------------
function p.isArray(v)
	if type(v) ~= 'table' then
		return false
	end
	local i = 0
	for _ in pairs(v) do
		i = i + 1
		if v[i] == nil then
			return false
		end
	end
	return true
end

------------------------------------------------------------------------------------
-- isArrayLike
--
-- Returns true if the given value is iterable and all keys are consecutive
-- integers starting at 1.
------------------------------------------------------------------------------------
function p.isArrayLike(v)
	if not pcall(pairs, v) then
		return false
	end
	local i = 0
	for _ in pairs(v) do
		i = i + 1
		if v[i] == nil then
			return false
		end
	end
	return true
end

------------------------------------------------------------------------------------
-- invert
--
-- Transposes the keys and values in an array. For example, {"a", "b", "c"} ->
-- {a = 1, b = 2, c = 3}. Duplicates are not supported (result values refer to
-- the index of the last duplicate) and NaN values are ignored.
------------------------------------------------------------------------------------
function p.invert(arr)
	checkType("invert", 1, arr, "table")
	local isNan = p.isNan
	local map = {}
	for i, v in ipairs(arr) do
		if not isNan(v) then
			map[v] = i
		end
	end

	return map
end

------------------------------------------------------------------------------------
-- listToSet
--
-- Creates a set from the array part of the table. Indexing the set by any of the
-- values of the array returns true. For example, {"a", "b", "c"} ->
-- {a = true, b = true, c = true}. NaN values are ignored as Lua considers them
-- never equal to any value (including other NaNs or even themselves).
------------------------------------------------------------------------------------
function p.listToSet(arr)
	checkType("listToSet", 1, arr, "table")
	local isNan = p.isNan
	local set = {}
	for _, v in ipairs(arr) do
		if not isNan(v) then
			set[v] = true
		end
	end

	return set
end

------------------------------------------------------------------------------------
-- deepCopy
--
-- Recursive deep copy function. Preserves identities of subtables.
------------------------------------------------------------------------------------
local function _deepCopy(orig, includeMetatable, already_seen)
	if type(orig) ~= "table" then
		return orig
	end
	
	-- already_seen stores copies of tables indexed by the original table.
	local copy = already_seen[orig]
	if copy ~= nil then
		return copy
	end
	
	copy = {}
	already_seen[orig] = copy -- memoize before any recursion, to avoid infinite loops
	
	for orig_key, orig_value in pairs(orig) do
		copy[_deepCopy(orig_key, includeMetatable, already_seen)] = _deepCopy(orig_value, includeMetatable, already_seen)
	end
	
	if includeMetatable then
		local mt = getmetatable(orig)
		if mt ~= nil then
			setmetatable(copy, _deepCopy(mt, true, already_seen))
		end
	end
	
	return copy
end

function p.deepCopy(orig, noMetatable, already_seen)
	checkType("deepCopy", 3, already_seen, "table", true)
	return _deepCopy(orig, not noMetatable, already_seen or {})
end

------------------------------------------------------------------------------------
-- sparseConcat
--
-- Concatenates all values in the table that are indexed by a number, in order.
-- sparseConcat{a, nil, c, d}  =>  "acd"
-- sparseConcat{nil, b, c, d}  =>  "bcd"
------------------------------------------------------------------------------------
function p.sparseConcat(t, sep, i, j)
	local arr = {}

	local arr_i = 0
	for _, v in p.sparseIpairs(t) do
		arr_i = arr_i + 1
		arr[arr_i] = v
	end

	return table.concat(arr, sep, i, j)
end

------------------------------------------------------------------------------------
-- length
--
-- Finds the length of an array, or of a quasi-array with keys such as "data1",
-- "data2", etc., using an exponential search algorithm. It is similar to the
-- operator #, but may return a different value when there are gaps in the array
-- portion of the table. Intended to be used on data loaded with mw.loadData. For
-- other tables, use #.
-- Note: #frame.args in frame object always be set to 0, regardless of  the number
-- of unnamed template parameters, so use this function for frame.args.
------------------------------------------------------------------------------------
function p.length(t, prefix)
	-- requiring module inline so that [[Module:Exponential search]] which is
	-- only needed by this one function doesn't get millions of transclusions
	local expSearch = require("Module:Exponential search")
	checkType('length', 1, t, 'table')
	checkType('length', 2, prefix, 'string', true)
	return expSearch(function (i)
		local key
		if prefix then
			key = prefix .. tostring(i)
		else
			key = i
		end
		return t[key] ~= nil
	end) or 0
end

------------------------------------------------------------------------------------
-- inArray
--
-- Returns true if searchElement is a member of the array, and false otherwise.
-- Equivalent to JavaScript array.includes(searchElement) or
-- array.includes(searchElement, fromIndex), except fromIndex is 1 indexed
------------------------------------------------------------------------------------
function p.inArray(array, searchElement, fromIndex)
	checkType("inArray", 1, array, "table")
	-- if searchElement is nil, error?

	fromIndex = tonumber(fromIndex)
	if fromIndex then
		if (fromIndex < 0) then
			fromIndex = #array + fromIndex + 1
		end
		if fromIndex < 1 then fromIndex = 1 end
		for _, v in ipairs({unpack(array, fromIndex)}) do
			if v == searchElement then
				return true
			end
		end
	else
		for _, v in pairs(array) do
			if v == searchElement then
				return true
			end
		end
	end
	return false
end

------------------------------------------------------------------------------------
-- merge
--
-- Given the arrays, returns an array containing the elements of each input array
-- in sequence.
------------------------------------------------------------------------------------
function p.merge(...)
	local arrays = {...}
	local ret = {}
	for i, arr in ipairs(arrays) do
		checkType('merge', i, arr, 'table')
		for _, v in ipairs(arr) do
			ret[#ret + 1] = v
		end
	end
	return ret
end

------------------------------------------------------------------------------------
-- extend
--
-- Extends the first array in place by appending all elements from the second
-- array.
------------------------------------------------------------------------------------
function p.extend(arr1, arr2)
	checkType('extend', 1, arr1, 'table')
	checkType('extend', 2, arr2, 'table')

	for _, v in ipairs(arr2) do
		arr1[#arr1 + 1] = v
	end
end

return p