ايڇ ٽي ٽي پي

ايڇ ٽي ٽي پي
ويب سائيٽ	httpwg.org/specs/

هائپرٽيڪسٽ ٽرانسفر پروٽوڪول (Hypertext transfer protocol) مختصر طور تي يا ايڇ ٽي ٽي پي (HTTP)، هڪ اوزار آهي جيڪو انٽرنيٽ ويب سائيٽون ٺاهڻ لاء استعمال ڪيو ويندو آهي. ويب ڊولپر ويب سائيٽون ٺاهڻ لاءِ هن اوزار کي استعمال ڪرڻ ٿا. اهو ورهايل، تعاون ڪندڙ، هائپر ميڊيا انفارميشن سسٽم لاءِ انٽرنيٽ پروٽوڪول سوٽ ۾ اها هڪ ايپليڪيشن ليئر پروٽوڪول آهي ۽ ورلڊ وائڊ ويب لاءِ ڊيٽا ڪميونيڪيشن جو بنياد آهي، جتي هائپر ٽيڪسٽ دستاويزن ۾ ٻين وسيلن جا هائپر لنڪ شامل آهن جن تائين صارف آساني سان رسائي ڪري سگهي ٿو، مثال طور مائوس ڪلڪ ذريعي يا ويب برائوزر ۾ اسڪرين کي ٽيپ ڪندي.

ايخ ٽي ٽي پي ڪلائنٽ-سرور ماڊل ۾ هڪ درخواست-جواب پروٽوڪول آهي. هڪ ٽرانزيڪشن هڪ ڪلائنٽ جي سرور تي درخواست جمع ڪرائڻ سان شروع ٿئي ٿي ۽ سرور درخواست کي پورو ڪرڻ جي ڪوشش ڪري ٿو ۽ ڪلائنٽ کي هڪ جواب واپس ڪري ٿو جيڪو درخواست جي ترتيب کي بيان ڪري ٿو ۽ اختياري طور تي هڪ گهربل وسيلو شامل آهي جهڙوڪ ايخ ٽي ايم ايل (HTML) دستاويز يا ٻيو مواد. هڪ عام منظرنامي ۾، هڪ ويب برائوزر ڪلائنٽ طور ڪم ڪري ٿو ۽ هڪ ويب سرور، هڪ يا وڌيڪ ويب سائيٽن کي هوسٽ ڪندڙ سرور آهي. هڪ ويب برائوزر هڪ صارف ايجنٽ جي مثال آهي. ٻين قسمن جي استعمال ڪندڙ ايجنٽ ۾ انڊيڪسنگ سافٽ ويئر شامل آهن جيڪا انٽرنيٽ تي سرچ فراهم ڪندڙن (web browser)، وائس برائوزرز، موبائل ايپ ۽ ٻيا سافٽ ويئر استعمال ڪندا آهن جيڪي ويب مواد تائين رسائي، استعمال، يا ڊسپلي ڪندا آهن.

ايخ ٽي ٽي پي کي انٽرميڊيٽ نيٽ ورڪ عنصرن کي اجازت ڏيڻ لاءِ ٺاهيو ويو آهي ته جيئن ڪلائنٽ ۽ سرورز جي وچ ۾ رابطي کي بهتر يا فعال ڪري سگهجي. هاءِ ٽريفڪ ويب سائيٽون اڪثر ڪري ويب ڪيش سرورز مان فائدو حاصل ڪن ٿيون جيڪي اپ اسٽريم سرورز جي طرفان مواد پهچائين ٿيون ته جيئن جوابي وقت کي بهتر بڻائي سگهجي. ويب برائوزر اڳ ۾ رسائي ڪيل ويب وسيلن کي ڪيش ڪن ٿا ۽ جڏهن به ممڪن هجي، نيٽ ورڪ ٽرئفڪ کي گهٽائڻ لاءِ انهن کي ٻيهر استعمال ڪن ٿا. پرائيويٽ نيٽ ورڪ جي حدن تي HTTP پراڪسي سرور ڪلائنٽ لاءِ عالمي سطح تي روٽيبل ايڊريس کان سواءِ رابطي کي آسان بڻائي سگهن ٿا، ٻاهرين سرورز سان پيغامن کي رليز ڪندي.

انٽرميڊيٽ HTTP نوڊس (پراڪسي سرورز، ويب Web Cache، وغيره) کي انهن جي ڪمن کي پورو ڪرڻ جي اجازت ڏيڻ لاءِ، ڪجهه HTTP هيڊرز (HTTP درخواستن/جوابن) کي هاپ-بائي-هاپ منظم ڪيو ويندو آهي جڏهن ته ٻيا HTTP هيڊرز اينڊ-ٽو-اينڊ منظم ڪيا ويندا آهن (صرف سورس ڪلائنٽ ۽ ٽارگيٽ ويب سرور پاران منظم ڪيو ويندو آهي).

هڪ ويب وسيلو هڪ يونيفارم ريسورس لوڪيٽر (Uniform Resource Locator؛ URL) ذريعي ڳولهيو ويندو آهي، جيڪو يونيفارم ريسورس آئيڊينٽيفائر (URI) اسڪيمن http ۽ https کي استعمال ڪندي آهي. URIs کي HTML دستاويزن ۾ هائپر لنڪس جي طور تي انڪوڊ ڪيو ويندو آهي، ته جيئن انٽر لنڪ ٿيل هائپر ٽيڪسٽ دستاويز ٺاهي سگهجن.

تاريخ

ٽم برنرز-لي

ٽم برنرز-لي ۽ سندس ٽيم کي CERN ۾ HTTP ايجاد ڪرڻ جو ڪريڊٽ ڏنو وڃي ٿو، HTML سان گڏ ۽ ويب سرور ۽ ڪلائنٽ يوزر انٽرفيس لاءِ لاڳاپيل ٽيڪنالاجي جنهن کي ويب برائوزر سڏيو ويندو آهي. برنرز-لي پنهنجي ٻئي خيال کي اپنائڻ ۾ مدد لاءِ HTTP ڊزائين ڪيو: "ورلڊ وائڊ ويب" منصوبو، جيڪو پهريون ڀيرو 1989ع ۾ تجويز ڪيو ويو هو، هاڻي ورلڊ وائڊ ويب جي نالي سان مشهور آهي.HTTP جي ترقي 1989ع ۾ شروع ڪئي وئي ۽ هڪ سادي دستاويز ۾ خلاصو ڪيو ويو جنهن ۾ ڪلائنٽ ۽ سرور جي رويي کي بيان ڪيو ويو جيڪو پهريون HTTP ورزن استعمال ڪندي، جن کي 0.9 جو نالو ڏنو ويو. اهو ورزن پوء ترقي ڪيو ۽ آخرڪار عوامي 1.0 بڻجي ويو. شروعاتي ايخ ٽي ٽي پي (HTTP) درخواست-ڪمنٽس (RFC) دستاويزن جي ترقي ڪجهه سالن بعد انٽرنيٽ انجنيئرنگ ٽاسڪ فورس (IETF) ۽ ورلڊ وائڊ ويب ڪنسورشيم (W3C) جي هڪ مربوط ڪوشش ۾ شروع ٿي، جنهن جو ڪم بعد ۾ IETF ڏانهن منتقل ٿيو.

پهريون ويب سرور 1990ع ۾ لائيو ٿيو. استعمال ٿيندڙ پروٽوڪول ۾ صرف هڪ طريقو هو يعني GET، جيڪو سرور کان هڪ صفحي جي درخواست ڪندو هو. سرور کان جواب هميشه هڪ HTML صفحو هوندو هو.

ورزن

پڻ ڏسو: CERN httpd

The protocol has been revised over time. A version is identified as HTTP/# where # is the version number. This article covers aspects of all versions but provides primary coverage for HTTP/0.9, HTTP/1.0, and HTTP/1.1. Separate articles cover HTTP/2 and HTTP/3 in detail.

Version	Introduced	Status
0.9	1991	Obsolete
1.0	1996	Obsolete
1.1	1997	Standard
2	2015	Standard
3	2022	Standard

In HTTP/1.0, a separate TCP connection to the same server is made for every resource request.سانچو:Ref RFC

In HTTP/1.1, instead a TCP connection can be reused to make multiple resource requests (i.e. of HTML pages, frames, images, scripts, stylesheets, etc.).سانچو:Ref RFC HTTP/1.1 communications therefore experience less latency as the establishment of TCP connections presents considerable overhead, especially under high traffic conditions.

Enhancements added with HTTP/2 allow for less latency and, in most cases, higher speeds than HTTP/1.1 communications. HTTP/2 adds support for:

• a compressed binary representation of metadata (HTTP headers) instead of a textual one, so that headers require much less space;
• a single TCP/IP (usually encrypted) connection per accessed server domain instead of 2 to 8 TCP/IP connections;
• one or more bidirectional streams per TCP/IP connection in which HTTP requests and responses are broken down and transmitted in small packets to almost solve the problem of the HOLB (head-of-line blocking);
• a push capability to allow server application to send data to clients whenever new data is available (without forcing clients to request periodically new data to server by using polling methods).سانچو:Ref RFC

HTTP/3 uses QUIC + UDP transport protocols instead of TCP. Only the IP layer is used (which UDP, like TCP, builds on). This slightly improves the average speed of communications and avoids the occasional problem of TCP connection congestion that can temporarily block or slow down the data flow of all its streams (another form of "head of line blocking").

Use

HTTP/2 is supported by 71% of websites (34.1% HTTP/2 + 36.9% HTTP/3 with backwards compatibility) and supported by almost all web browsers (over 98% of users). It is also supported by major web servers over Transport Layer Security (TLS) using an Application-Layer Protocol Negotiation (ALPN) extensionسانچو:Ref RFC where TLS 1.2 or newer is required.سانچو:Ref RFC

HTTP/3 is used on 36.9% of websites and is supported by most web browsers, i.e. (at least partially) supported by 97% of users. HTTP/3 uses QUIC instead of TCP for the underlying transport protocol. Like HTTP/2, it does not obsolete previous major versions of the protocol. In 2019, support for HTTP/3 was first added to Cloudflare and Chrome and also enabled in Firefox. HTTP/3 has lower latency for real-world web pages and loads faster than HTTP/2, in some cases over three times faster than HTTP/1.1, which is still commonly the only protocol enabled.

HTTPS, the secure variant of HTTP, is used by more than 85% of websites.

Technology

Transport layer

HTTP presumes an underlying and reliable transport layer protocol.سانچو:Ref RFC The standard choice of the underlying protocol prior to HTTP/3 is Transmission Control Protocol (TCP). HTTP/3 uses a different transport layer called QUIC, which provides reliability on top of the unreliable User Datagram Protocol (UDP). HTTP/1.1 and earlier have been adapted to be used over plain unreliable UDP in multicast and unicast situations, forming HTTPMU and HTTPU. They are used in UPnP and Simple Service Discovery Protocol (SSDP), two protocols usually run on a local area network.

Data exchange

HTTP is a stateless application-level protocol and it requires a reliable network transport connection to exchange data between client and server. In HTTP implementations, TCP/IP connections are used using well-known ports (typically port 80 if the connection is unencrypted or port 443 if the connection is encrypted, see also List of TCP and UDP port numbers).سانچو:Ref RFC In HTTP/2, a TCP/IP connection plus multiple protocol channels are used. In HTTP/3, the application transport protocol QUIC over UDP is used.

Request and response messages through connections

Data is exchanged through a sequence of request–response messages which are exchanged by a session layer transport connection. An HTTP client initially tries to establish a connection, real or virtual, with a server. An HTTP server listening on the port accepts the connection and then waits for a client's request message. The client sends its HTTP request message. Upon receiving the request the server sends back an HTTP response message, which includes header(s) plus a body if it is required. The body of this response message is typically the requested resource, although an error message or other information may also be returned. At any time and for many reasons, either the client or server can close the connection. Closing a connection is usually advertised by one or more HTTP headers in the last request or response.سانچو:Ref RFC

Persistent connections

اصل مضمون جي لاءِ ڏسو HTTP persistent connection

In HTTP/0.9, the TCP/IP connection is always closed after server response has been sent, so it is never persistent.

In HTTP/1.0, the TCP/IP connection should always be closed by server after a response has been sent.سانچو:Ref RFC

In HTTP/1.1, a keep-alive-mechanism was officially introduced so that a connection could be reused for more than one request/response. Such persistent connections reduce request latency perceptibly because the client does not need to re-negotiate the TCP 3-Way-Handshake connection after the first request has been sent. Another positive side effect is that, in general, the connection becomes faster with time due to TCP's slow-start-mechanism.

HTTP/1.1 added also HTTP pipelining in order to further reduce lag time when using persistent connections by allowing clients to send multiple requests before waiting for each response. This optimization was never considered really safe because a few web servers and many proxy servers, specially transparent proxy servers placed in Internet / Intranets between clients and servers, did not handle pipelined requests properly (they served only the first request discarding the others, they closed the connection because they saw more data after the first request or some proxies even returned responses out of order etc.). Because of this, only HEAD and some GET requests (i.e. limited to real file requests and so with URLs without query string used as a command, etc.) could be pipelined in a safe and idempotent mode. After many years of struggling with the problems introduced by enabling pipelining, this feature was first disabled and then removed from most browsers also because of the announced adoption of HTTP/2.

HTTP/2 extended the usage of persistent connections by multiplexing many concurrent requests/responses through a single TCP/IP connection.

HTTP/3 does not use TCP/IP connections but QUIC + UDP.

Content retrieval optimizations

In HTTP/0.9, a requested resource was always sent in its entirety.

HTTP/1.0 added headers to manage resources cached by a client in order to allow conditional GET requests.

• A server must return the entire content of the requested resource only if its last modified time is not known by the client or if it changed since the last full response to a GET request.

• Header Content-Encoding was added to specify whether the returned content is compressed.

• If the size of the content is not known in advance (i.e. because it is dynamically generated) then the header Content-Length would not be included. The client would assume that transfer was complete when the connection closed, but a premature close would leave the client with partial content yet the client would not know it's partial.

HTTP/1.1 introduced and later versions provide:

• Headers to better manage the conditional retrieval of cached resources.

• Chunked transfer encoding allows content to be streamed in chunks in order to reliably send it even when the server does not know its length in advance (i.e. because it is dynamically generated, etc.).

• Byte range serving allows a client to request portions (ranges of bytes) of a resource. This is useful to resume an interrupted download (when a file is very large), when only a part of a content has to be shown or dynamically added to the already visible part by a browser (i.e. only the first or the following n comments of a web page) in order to spare time, bandwidth and system resources, etc.

Application session

As a stateless protocol, HTTP does not require the web server to retain information or status about each user for the duration of multiple requests. If a web application needs an application session, it implements it via HTTP cookies, hidden variables in a web form or another mechanism.

Typically, to start a session, an interactive login is performed, and to end a session, a logout is requested by the user. These kind of operations use a custom authentication mechanism, not HTTP authentication.

Authentication

HTTP provides multiple authentication schemes such as basic access authentication and digest access authentication which operate via a challenge–response mechanism whereby the server identifies and issues a challenge before serving the requested content.

HTTP provides a general framework for access control and authentication, via an extensible set of challenge–response authentication schemes, which can be used by a server to challenge a client request and by a client to provide authentication information.سانچو:Ref RFC

The authentication mechanisms described above belong to the HTTP protocol and are managed by client and server HTTP software (if configured to require authentication before allowing client access to one or more web resources), and not by the web applications using an application session.

The HTTP authentication specification includes realms that provide an arbitrary, implementation-specific construct for further dividing resources common to a given root URI. The realm value string, if present, is combined with the canonical root URI to form the protection space component of the challenge. This in effect allows the server to define separate authentication scopes under one root URI.

Encrypted connection

The most popular way of establishing an encrypted HTTP connection is HTTPS. Two other methods for establishing an encrypted HTTP connection also exist: Secure Hypertext Transfer Protocol, and using the HTTP/1.1 Upgrade header to specify an upgrade to TLS. Browser support for these two is, however, nearly non-existent.

Message format

An HTTP/1.1 request made using telnet. The parts of the transaction are shown in different colors: request in red, response header in purple, and response body in green.

This section describes messages for HTTP/1.1. Later versions, HTTP/2 and HTTP/3, use a binary protocol, where headers are encoded in a single HEADERS and zero or more CONTINUATION frames using HPACK (HTTP/2) or QPACK (HTTP/3), which both provide efficient header compression. The request or response line from HTTP/1 has also been replaced by several pseudo-header fields, each beginning with a colon (:).

At the highest level, a message consists of a header followed by a body.

Header

A header consists of lines of ASCII text; each terminated with a carriage return and line feed sequence. The layout for both a request and a response header is:

Start line

Structured data that differs for request vs. response.

Header fields

Zero or more header field lines (at least 1 for HTTP/1.1); see below.

Empty line

Marks the end of the header.

Body

A body consists of data in any format; not limited to ASCII. The format must match that specified by the Content-Type header field if the message contains one. A body is optional or, in other words, can be blank.

Entity

Before HTTP/2, the term entity was used to mean the body plus header fields that describe the body. In particular, not all headers were considered part of the entity. The term entity header referred to a header that was considered part of the entity, and sometimes the body was called the entity body. Modern documentation uses body and header without using entity.

Header field

پڻ ڏسو: List of HTTP header fields

A header field represents metadata about the containing message. Examples include how the body is encoded (via Content-Encoding), session verification and identification of the client (as in browser cookies, IP address, user-agent) or their anonymity thereof (VPN or proxy masking, user-agent spoofing), how the server should handle data (as in Do-Not-Track or Global Privacy Control), and the age (the time it has resided in a shared cache) of the document being downloaded. Generally, the information of a header field is used by software and not shown to the user.

A header field line is formatted as a name-value pair with a colon separator. Whitespace is not allowed around the name, but leading and trailing whitespace is ignored for the value part. Unlike a method name that must match exactly (case-sensitive), a header field name is matched ignoring case although often shown with each word capitalized. For example, the following are header fields for Host and Accept-Language.

Host: www.example.com
Accept-Language: en

The standards do not limit the size of a header field or the number of fields in a message. However, most servers, clients, and proxy software impose limits for practical and security reasons. For example, the Apache 2.3 server by default limits the size of each field to 8190 bytes, and there can be at most 100 header fields in a single request.

Although deprecated by RFC 7230, in the past, long lines could be split into multiple lines with a continuation line starting with a space or tab character.

Request

A request is sent by a client to a server. The start line includes a method name, a request URI and the protocol version with a single space between each field. The following request start line specifies method GET, URI /customer/123 and protocol version HTTP/1.1:

GET /customer/123 HTTP/1.1

Request header fields allow the client to pass additional information beyond the request line, acting as request modifiers (similarly to the parameters of a procedure). They give information about the client, about the target resource, or about the expected handling of the request. In the HTTP/1.1 protocol, all header fields except Host are optional.

A request line containing only the path name is accepted by servers to maintain compatibility with HTTP clients before the HTTP/1.0 specification in سانچو:IETF RFC.

Resource

The protocol structures transaction as operating on resources. What a resource represents, whether pre-existing data or data that is generated dynamically, depends on the implementation of the server. Often, the resource corresponds to a file or the output of an executable running on the server.

Method

A request identifies a method (sometimes informally called verb) to classify the desired action to be performed on a resource. The HTTP/1.0 specificationسانچو:Ref RFC defined the GET, HEAD, and POST methods as well as listing the PUT, DELETE, LINK and UNLINK methods under additional methods. However, the HTTP/1.1 specificationسانچو:Ref RFC added five new methods: PUT, DELETE, CONNECT, OPTIONS, and TRACE. Any client can use any method and the server can be configured to support any combination of methods. If a method is unknown to an intermediate, it will be treated as an unsafe and non-idempotent method. There is no limit to the number of methods that can be defined, which allows for future methods to be specified without breaking existing infrastructure. For example, WebDAV defined seven new methods and سانچو:IETF RFC specified the PATCH method. A general-purpose web server is required to implement at least GET and HEAD, and all other methods are considered optional by the specification.سانچو:Ref RFC

Method names are case sensitive.سانچو:Ref RFCسانچو:Ref RFC This is in contrast to HTTP header field names which are case-insensitive.سانچو:Ref RFC

GET

The request is for a representation of a resource. The server should only retrieve data; not modify state. For retrieving without making changes, GET is preferred over POST, as it can be addressed through a URL. This enables bookmarking and sharing and makes GET responses eligible for caching, which can save bandwidth. The W3C has published guidance principles on this distinction, saying, "Web application design should be informed by the above principles, but also by the relevant limitations."

HEAD

The request is like a GET except that the response should not include the representation data in the body. This is useful for retrieving the representation metadata in the response header, without having to transfer the entire representation. Uses include checking whether a page is available via the status code and getting the size of a file via header field Content-Length.

POST

The request is to process a resource in some way. For example, it is used for posting a message to an Internet forum, subscribing to a mailing list, or completing an online shopping transaction.سانچو:Ref RFC

PUT

The request is to create or update a resource with the state in the request. A distinction from POST is that the client specifies the target location on the server.سانچو:Ref RFC

DELETE

The request is to delete a resource.

CONNECT

Requests that the intermediary establish a TCP/IP tunnel to the origin server identified by the request target. It is often used to secure connections through one or more HTTP proxies with TLS.سانچو:Ref RFC See HTTP CONNECT method.

OPTIONS

Request is for a report of the HTTP methods that are supported for a resource. This can be used to check the functionality of a web server by requesting '*' instead of a specific resource.

TRACE

Requests the server to respond with the received request in the response body. That way a client can see what (if any) changes or additions have been made by intermediaries. Useful for debugging.

PATCH

The request is to modify a resource according to its partial state in the request. Compared to PUT, this can save bandwidth by sending only part of a resource's representation instead of all of it.سانچو:Ref RFC

Properties of request methods

Method	RFC	Request has payload body	Response has payload body	Safe	Idempotent	Cacheable
GET	سانچو:IETF RFC	سانچو:Optional	ھا	ھا	ھا	ھا
HEAD	سانچو:IETF RFC	سانچو:Optional	نہ	ھا	ھا	ھا
POST	سانچو:IETF RFC	ھا	ھا	نہ	نہ	ھا
PUT	سانچو:IETF RFC	ھا	ھا	نہ	ھا	نہ
DELETE	سانچو:IETF RFC	سانچو:Optional	ھا	نہ	ھا	نہ
CONNECT	سانچو:IETF RFC	سانچو:Optional	ھا	نہ	نہ	نہ
OPTIONS	سانچو:IETF RFC	سانچو:Optional	ھا	ھا	ھا	نہ
TRACE	سانچو:IETF RFC	نہ	ھا	ھا	ھا	نہ
PATCH	سانچو:IETF RFC	ھا	ھا	نہ	نہ	نہ

Safe method

A request method is safe if a request with that method has no intended effect on the server. The methods GET, HEAD, OPTIONS, and TRACE are defined as safe. In other words, safe methods are intended to be read-only. Safe methods can still have side effects not seen by the client, such as appending request information to a log file or charging an advertising account.

In contrast, the methods POST, PUT, DELETE, CONNECT, and PATCH are not safe. They may modify the state of the server or have other effects such as sending an email. Such methods are therefore not usually used by conforming web robots or web crawlers; some that do not conform tend to make requests without regard to context or consequences.

Despite the prescribed safety of GET requests, in practice their handling by the server is not technically limited in any way. Careless or deliberately irregular programming can allow GET requests to cause non-trivial changes on the server. This is discouraged because of the problems which can occur when web caching, search engines, and other automated agents make unintended changes on the server. For example, a website might allow deletion of a resource through a URL such as https://example.com/article/1234/delete, which, if arbitrarily fetched, even using GET, would simply delete the article. A properly coded website would require a DELETE or POST method for this action, which non-malicious bots would not make.

One example of this occurring in practice was during the short-lived Google Web Accelerator beta, which prefetched arbitrary URLs on the page a user was viewing, causing records to be automatically altered or deleted en masse. The beta was suspended only weeks after its first release, following widespread criticism.

Idempotent method

پڻ ڏسو: Idempotence#Computer science meaning

A request method is idempotent if multiple identical requests with that method have the same effect as a single such request. The methods PUT and DELETE, and safe methods are defined as idempotent. Safe methods are trivially idempotent, since they are intended to have no effect on the server whatsoever; the PUT and DELETE methods, meanwhile, are idempotent since successive identical requests will be ignored. A website might, for instance, set up a PUT endpoint to modify a user's recorded email address. If this endpoint is configured correctly, any requests which ask to change a user's email address to the same email address which is already recorded—e.g. duplicate requests following a successful request—will have no effect. Similarly, a request to DELETE a certain user will have no effect if that user has already been deleted.

In contrast, the methods POST, CONNECT, and PATCH are not necessarily idempotent, and therefore sending an identical POST request multiple times may further modify the state of the server or have further effects, such as sending multiple emails. In some cases this is the desired effect, but in other cases it may occur accidentally. A user might, for example, inadvertently send multiple POST requests by clicking a button again if they were not given clear feedback that the first click was being processed. While web browsers may show alert dialog boxes to warn users in some cases where reloading a page may re-submit a POST request, it is generally up to the web application to handle cases where a POST request should not be submitted more than once.

Note that whether or not a method is idempotent is not enforced by the protocol or web server. It is perfectly possible to write a web application in which (for example) a database insert or other non-idempotent action is triggered by a GET or other request. To do so against recommendations, however, may result in undesirable consequences, if a user agent assumes that repeating the same request is safe when it is not.

Cacheable method

پڻ ڏسو: Web cache

A request method is cacheable if responses to requests with that method may be stored for future reuse. The methods GET, HEAD, and POST are defined as cacheable.

In contrast, the methods PUT, DELETE, CONNECT, OPTIONS, TRACE, and PATCH are not cacheable.

Response

A response is sent to the client by the server. The start line of a response consists of the protocol version, a status code and optionally a reason phrase with fields separated by a single space character. سانچو:Ref RFC The following response start line specifies protocol version HTTP/1.1, status code 400 and reason phrase Bad Request.

HTTP/1.1 400 Bad Request

Response header fields allow the server to pass additional information beyond the status line, acting as response modifiers. They give information about the server or about further access to the target resource or related resources. Each response header field has a defined meaning which can be further refined by the semantics of the request method or response status code.

Status code

پڻ ڏسو: List of HTTP status codes

The status code is a three-digit, decimal, integer value that represents the disposition of the server's attempt to satisfy the client's request. Generally, a client handles a response primarily based on the status code and secondarily on response header fields. A client may not understand each status code that a server reports but it must understand the class as indicated by the first digit and treat an unrecognized code as equivalent to the x00 code of that class. The classes are as follows:

1XX informational

The request was received, continuing process.

2XX successful

The request was successfully received, understood, and accepted.

3XX redirection

Further action needs to be taken in order to complete the request.

4XX client error

The request cannot be fulfilled due to an issue that the client might be able to control.

5XX server error

The server failed to fulfill an apparently valid request.

Reason phrase

The standard reason phrases are only recommendations. A web server is allowed to use a localized equivalent. If a status code indicates a problem, the user agent might display the reason phrase to the user to provide further information about the nature of the problem. The standard also allows the user agent to attempt to interpret the reason phrase, though this might be unwise since the standard explicitly specifies that status codes are machine-readable and reason phrases are human-readable.

Example

The following demonstrates an HTTP/1.1 request-response transaction for a server at www.example.com, port 80. HTTP/1.0 would use the same messages except for a few missing headers. HTTP/2 and HTTP/3 would use the same request-response mechanism but with different representations for HTTP headers.

The following is a request with no body. It consists of a start line, 6 header fields and a blank line سانچو:Endash each terminated with a carriage return and line feed sequence. The Host header field distinguishes between various DNS names sharing a single IP address, allowing name-based virtual hosting. While optional in HTTP/1.0, it is mandatory in HTTP/1.1.

GET / HTTP/1.1
Host: www.example.com
User-Agent: Mozilla/5.0
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,*/*;q=0.8
Accept-Language: en-GB,en;q=0.5
Accept-Encoding: gzip, deflate, br
Connection: keep-alive

Although not clear in the representation above (due to limitations of this wiki), the blank line at the end results in ending in two line terminator sequences. Represented as a stream of characters, a shorted version of above shows this more clearly with <CRLF> representing a line terminator sequence: GET / HTTP/1.1<CRLF>Host: www.example.com<CRLF><CRLF>.

In the following response, the ETag (entity tag) header field is used to determine if a cached version of the requested resource is identical to the current version of the resource on the server. The Content-Type header field specifies the Internet media type of the data conveyed by the HTTP message, and Content-Length indicates its length in bytes. The HTTP/1.1 webserver publishes its ability to respond to requests for a byte range of the resource by including Accept-Ranges: bytes. This is useful, if the client needs to have only certain portions of a resource sent by the server, which is called byte serving. When Connection: close is sent, it means that the web server will close the TCP connection immediately after the end of the transfer of this response.سانچو:Ref RFC

Most of the header fields are optional but some are mandatory. When header Content-Length is missing from a response with a body, then this should be considered an error in HTTP/1.0 but it may not be an error in HTTP/1.1 if header Transfer-Encoding: chunked is present. Chunked transfer encoding uses a chunk size of 0 to mark the end of the content. Some old implementations of HTTP/1.0 omitted the header Content-Length when the length of the body was not known at the beginning of the response and so the transfer of data to client continued until server closed the socket.

Content-Encoding: gzip informs the client that the body is compressed per the gzip algorithm.

HTTP/1.1 200 OK
Date: Mon, 23 May 2005 22:38:34 GMT
Content-Type: text/html; charset=UTF-8
Content-Length: 155
Last-Modified: Wed, 08 Jan 2003 23:11:55 GMT
Server: Apache/1.3.3.7 (Unix) (Red-Hat/Linux)
ETag: "3f80f-1b6-3e1cb03b"
Accept-Ranges: bytes
Connection: close

<html>
  <head>
    <title>An Example Page</title>
  </head>
  <body>
    <p>Hello World, this is a very simple HTML document.</p>
  </body>
</html>

Similar protocols

Gopher protocol

A content delivery protocol that was displaced by HTTP in the early 1990s.

SPDY protocol

An alternative to HTTP developed at Google, superseded by HTTP/2.

Gemini protocol

A Gopher-inspired protocol which mandates privacy-related features.

تاريخ

ٽم برنرز-لي

ٽم برنرز-لي ۽ سندس ٽيم کي CERN ۾ HTTP ايجاد ڪرڻ جو ڪريڊٽ ڏنو وڃي ٿو، HTML سان گڏ ۽ ويب سرور ۽ ڪلائنٽ يوزر انٽرفيس لاءِ لاڳاپيل ٽيڪنالاجي جنهن کي ويب برائوزر سڏيو ويندو آهي. برنرز-لي پنهنجي ٻئي خيال کي اپنائڻ ۾ مدد لاءِ HTTP ڊزائين ڪيو: "ورلڊ وائڊ ويب" منصوبو، جيڪو پهريون ڀيرو 1989ع ۾ تجويز ڪيو ويو هو، هاڻي ورلڊ وائڊ ويب جي نالي سان مشهور آهي.HTTP جي ترقي 1989ع ۾ شروع ڪئي وئي ۽ هڪ سادي دستاويز ۾ خلاصو ڪيو ويو جنهن ۾ ڪلائنٽ ۽ سرور جي رويي کي بيان ڪيو ويو جيڪو پهريون HTTP ورزن استعمال ڪندي، جن کي 0.9 جو نالو ڏنو ويو. اهو ورزن پوء ترقي ڪيو ۽ آخرڪار عوامي 1.0 بڻجي ويو. شروعاتي ايخ ٽي ٽي پي (HTTP) درخواست-ڪمنٽس (RFC) دستاويزن جي ترقي ڪجهه سالن بعد انٽرنيٽ انجنيئرنگ ٽاسڪ فورس (IETF) ۽ ورلڊ وائڊ ويب ڪنسورشيم (W3C) جي هڪ مربوط ڪوشش ۾ شروع ٿي، جنهن جو ڪم بعد ۾ IETF ڏانهن منتقل ٿيو.

پهريون ويب سرور 1990ع ۾ لائيو ٿيو. استعمال ٿيندڙ پروٽوڪول ۾ صرف هڪ طريقو هو يعني GET، جيڪو سرور کان هڪ صفحي جي درخواست ڪندو هو. سرور کان جواب هميشه هڪ HTML صفحو هوندو هو.

HTTP/0.9

In 1991, the first documented official version of HTTP was written as a plain document, less than 700 words long, and this version was named HTTP/0.9, which supported only GET method, allowing clients to only retrieve HTML documents from the server, but not supporting any other file formats or information upload.

HTTP/1.0-draft

Since 1992, a new document was written to specify the evolution of the basic protocol towards its next full version. It supported both the simple request method of the 0.9 version and the full GET request that included the client HTTP version. This was the first of the many unofficial HTTP/1.0 drafts that preceded the final work on HTTP/1.0.

W3C HTTP Working Group

After having decided that new features of HTTP protocol were required and that they had to be fully documented as official RFC documents, in early 1995, the HTTP Working Group (HTTP WG, led by Dave Raggett) was constituted with the aim to standardize and expand the protocol with extended operations, extended negotiation, richer meta-information, tied with a security protocol which became more efficient by adding additional methods and header fields.

The HTTP WG planned to revise and publish new versions of the protocol as HTTP/1.0 and HTTP/1.1 within 1995, but, because of the many revisions, that timeline lasted much more than one year.

The HTTP WG planned also to specify a far future version of HTTP called HTTP-NG (HTTP Next Generation) that would have solved all remaining problems, of previous versions, related to performances, low latency responses, etc. but this work started only a few years later and it was never completed.

HTTP/1.0

In May 1996, سانچو:Sum RFC was published as a final HTTP/1.0 revision of what had been used in previous 4 years as a pre-standard HTTP/1.0-draft which was already used by many web browsers and web servers.

In early 1996 developers started to even include unofficial extensions of the HTTP/1.0 protocol (i.e. keep-alive connections, etc.) into their products by using drafts of the upcoming HTTP/1.1 specifications.

HTTP/1.1

Since early 1996, major web browsers and web server developers also started to implement new features specified by pre-standard HTTP/1.1 drafts specifications. End-user adoption of the new versions of browsers and servers was rapid. In March 1996, one web hosting company reported that over 40% of browsers in use on the Internet used the new HTTP/1.1 header "Host" to enable virtual hosting, and that by June 1996, 65% of all browsers accessing their servers were pre-standard HTTP/1.1 compliant.

In January 1997, سانچو:Sum RFC was officially released as HTTP/1.1 specifications.

In June 1999, سانچو:Sum RFC was released to include all improvements and updates based on previous (obsolete) HTTP/1.1 specifications.

W3C HTTP-NG Working Group

Resuming the old 1995 plan of previous HTTP Working Group, in 1997 an HTTP-NG Working Group was formed to develop a new HTTP protocol named HTTP-NG (HTTP New Generation). A few proposals / drafts were produced for the new protocol to use multiplexing of HTTP transactions inside a single TCP/IP connection, but in 1999, the group stopped its activity passing the technical problems to IETF.

IETF HTTP Working Group restarted

In 2007, the IETF HTTP Working Group (HTTP WG bis or HTTPbis) was restarted firstly to revise and clarify previous HTTP/1.1 specifications and secondly to write and refine future HTTP/2 specifications (named httpbis).

SPDY

In 2009, Google announced SPDY سانچو:Endash a binary protocol they developed to speed up web traffic between browsers and servers. In many tests, using SPDY was indeed faster than using HTTP/1.1. SPDY was integrated into Google's Chromium and then into other major web browsers. Some of the ideas about multiplexing HTTP streams over a single TCP connection were taken from various sources, including the work of W3C HTTP-NG Working Group.

HTTP/2

In 2012, HTTP Working Group (HTTPbis) announced the need for a new protocol; initially considering aspects of SPDY and eventually deciding to derive the new protocol from SPDY. In May 2015, HTTP/2 was published as سانچو:Sum RFC. The protocol was quickly adopted by web browsers already supporting SPDY and more slowly by web servers.

2014 updates to HTTP/1.1

In June 2014, the HTTP Working Group released an updated six-part HTTP/1.1 specification obsoleting سانچو:Sum RFC:

• سانچو:Sum RFC
• سانچو:Sum RFC
• سانچو:Sum RFC
• سانچو:Sum RFC
• سانچو:Sum RFC
• سانچو:Sum RFC

HTTP/0.9 Deprecation

In 2014, HTTP/0.9 was deprecated for servers supporting version HTTP/1.1 (and higher):سانچو:Ref RFC

Since HTTP/0.9 did not support header fields in a request, there is no mechanism for it to support name-based virtual hosts (selection of resource by inspection of the Host header field). Any server that implements name-based virtual hosts ought to disable support for HTTP/0.9. Most requests that appear to be HTTP/0.9 are, in fact, badly constructed HTTP/1.x requests caused by a client failing to properly encode the request-target.

Since 2016 many product managers and developers of user agents (browsers, etc.) and web servers have begun planning to gradually deprecate and dismiss support for HTTP/0.9 protocol, mainly for the following reasons:

• it is so simple that an RFC document was never written (there is only the original document);
• it has no HTTP headers and lacks many other features that nowadays are required for minimal security reasons;
• it has not been widespread since 1999..2000 (because of HTTP/1.0 and HTTP/1.1) and is commonly used only by some very old network hardware, i.e. routers, etc.

As of 2022, HTTP/0.9 support has not been officially, completely deprecated and is still present in many web servers and browsers (for server responses only), even if usually disabled. It is unclear how long it will take to decommission HTTP/0.9.

HTTP/3

In 2020, the first drafts of HTTP/3 were published and major web browsers and web servers started to adopt it. On 6 June 2022, IETF standardized HTTP/3 as سانچو:Sum RFC.

Updates and refactoring in 2022

In June 2022, RFC documents were published that deprecated many of the previous documents and introducing a few minor changes and a refactoring of HTTP semantics description into a separate document.

• سانچو:Sum RFC
• سانچو:Sum RFC
• سانچو:Sum RFC
• سانچو:Sum RFC
• سانچو:Sum RFC (See also the section above.)
• سانچو:Sum RFC
• سانچو:Sum RFC

پڻ ڏسو

• Comparison of file transfer protocols
• Constrained Application Protocol
• Content negotiation
• Digest access authentication
• InterPlanetary File System
• HTTP compression
• Representational state transfer
• Variant object
• Web cache
• WebSocket
• Wireless Application Protocol

ٻاهريان ڳنڍڻا

• Official website
• سانچو:Github
• "Change History for HTTP". W3.org. 2010-08-01 تي حاصل ڪيل. A detailed technical history of HTTP.
• "Design Issues for HTTP". W3.org. 2010-08-01 تي حاصل ڪيل. Design Issues by Berners-Lee when he was designing the protocol.

• Official website
• سانچو:Github
• "History for HTTP". W3.org. 2010-08-01 تي حاصل ڪيل. ايڇ ٽي ٽي پي جي هڪ تفصيلي ٽيڪنيڪل تاريخ
• "HTTP لاءِ ڊيزائن جا مسئلا". W3.org. 2010-08-01 تي حاصل ڪيل. برنرز-لي پاران پروٽوڪول ڊيزائن ڪرڻ وقت ڊيزائن جا مسئلا.